FLM‑420‑O1I1 Output-input Interface Modules
Technical Specifications | ||
Electrical | LSN | |
• LSN input voltage | 15 V DC to 33 V DC | |
• Max. current consumption from LSN | 1.9 mA | |
Output | ||
• Max. switchable voltage of semi-conductor output |
30 V DC | |
• Max. switchable output current | 700 mA (depending on external power supply) |
|
• External power supply | 5 V DC to 30 V DC | |
Input | ||
Line monitoring with EOL | ||
• EOL resistor | Nominal 3.9 kΩ | |
• Overall line resistance RΣ with RΣ = RL/1 + RL/ 2 + REOL |
• Standby: 1500 Ω to 6000 Ω • Short circuit: < 800 Ω • Line interruption: > 12.000 Ω |
|
Contact monitoring | ||
• Max. current strength (current pulse) | 8 mA | |
Minimum activation time of the input | 3.2 s | |
Mechanics | Connections | |
• FLM-420-O1I1-E | 14 screw terminals | |
• FLM-420-O1I1-D | 12 screw terminals | |
Permissible wire diameter | ||
• FLM-420- O1I1-E | 0.6 mm2 to 2.0 mm2 | |
• FLM-420- O1I-D | 0.6 mm2 to 3.3 mm2 | |
Address setting | ||
• FLM-420- O1I1-E | 8 DIP switches | |
• FLM-420- O1I1-D | 3 rotary switches | |
Housing material | ||
• FLM-420- O1I1-E | ABS/PC blend | |
• FLM-420- O1I1-D incl. adapter | PPO (Noryl) | |
Housing color | ||
• FLM-420- O1I1-E | Signal white, RAL 9003 | |
• FLM-420- O1I1-D incl. adapter | Gray white, similar to RAL 9002 | |
Dimensions | ||
• FLM-420- O1I1-E | Approx. 50 mm x 22 mm (Ø x H) | |
• FLM-420- O1I1-D incl. adapter | Approx. 110 x 110 x 48 mm (W x H x D) |
|
Weight | Without/with packing | |
• FLM-420- O1I1-E | Approx. 35 g / 170 g | |
• FLM-420-O2-D | Approx. 95 g / 390 g | |
Environmental conditions | Permissible operating temperature | -20 °C to +65 °C |
Permissible storage temperature | -25 °C to +80 °C | |
Permissible rel. humidity | < 96% (non-condensing) | |
Classes of equipment as per IEC 60950 | Class III equipment | |
Protection class as per IEC 60529 | IP 30 | |
System limiting values | Maximum cable length input | 3 m |
Maximum cable length output | 3 m |